HomeSite MapSearchCheckoutStore TopUp a LevelContact Us
View Cart |Checkout
Online Shop | DISPENSING & EQUIPMENT
OUT OF STOCK
To ship orders outside the UK, but within the EU
PQ50-P is a twin push-rod, light-weight 1:1 ratio glue dispensing gun made of heavy duty plastic. This gun will hold a 50ml dual barrel cartridge securely. It has a gun type handgrip and a trigger which advances the push rods by a ratchet mechanism to dispense the 2 parts of adhesive. It is used for dispensing glue from most makes of two part 1:1 and 2:1 ratio adhesives from 50ml dual cartridges. The twin push-rod plunger is suitable for both 1:1 and 2:1 ratios. It is used for dispensing Two Part Adhesives in Twin Pack Cartridges, such as :Structural Acrylic Adhesive - 50 ml (Normally using a 3.25" or 4.50" Green square nozzle).Two Part Epoxy Adhesive - 50 ml (Normally using a 3.25" or 5.00" White round nozzle).
Metal 1:1 Dispensing gun suitable for 50ml cartridges.
10 : 1 Glue Dispensing Gun is a twin push-rod 10:1 ratio glue dispensing gun made of steel. It is used for dispensing most makes of two part 10:1 ratio adhesive from dual cartridges held by the gun.
PQ401 Glue Dispensing GunPQ401 is a twin push-rod 1:1 ratio glue dispensing gun made of steel. It is used for dispensing most makes of two part 1:1 ratio adhesive from 400ml dual cartridges held by the gun.
For use with SG3295 & SG5000 series
MN125 Small White Round Mixer Nozzle MN125 is a small, round, 1 : 1 ratio adhesive mixer nozzle. It is used for accurately dispensing epoxy resin adhesives. It is used for dispensing two part adhesives supplied in 50ml dual cartridges. The nozzle is attached to the top of the glue cartridge by locating it after removing the cap and locking by a half turn. It will then mix the two parts or components of the adhesive evenly as they are being pumped out by the dual plunger glue dispensing gun. Length 128mm (6"), tube diameter 9mm. MN125 is normally used for epoxy adhesives.Acrylic adhesives normally use a different small green square nozzle called : 50ML GREEN.
10:1 nozzles for use with the Scigrip SG300 x 50ml series
10:1 Mix Nozzles for use with Scigrip 490ml cartridges
MNL10 X 400ML Nozzles for use with any grade 400ml EDS Mch 13-18T
To be used in conjunction with Cyanoacrylate adhesives
1.25" ID 1.60mm
1.25" ID 1.22mm
125" ID 0.84mm
1.25" ID 0.41mm
15G x 1.5" Fast Dispense
18G x 1.5" Medium dispense
20G x 1.5" Slow Dispense
25G x 1.5" Extra Slow Dispense
This high intensity UV hand held flood lamp provides rapid curing of UV materials. This product is used by thousands of companies worldwide for hundreds of different applications..Product features.Compact, lightweight and durableFan cooled135V to UV hand lamp for added electrical safetyFilter glass assembly is fitted to a hinged front door, enabling easy access for UV bulb replacement and cleaningElapsed hour counter for service schedulingSafety wire mesh over filter glassUV light spectral output.The selection of UV bulb and filter glass will depend on the particular application..
Features:UV LED Wavelength 395nmLED Quantity 51pcs3 x AAA batteries are required and includedideal for small applications
Copyright © 2011 Glueonline.co.uk - Adhesive Solutions for Industry Terms and Conditions Click Here