Online Shop

HomeSite MapSearchCheckoutStore TopUp a LevelContact Us

Items:, Value:


 


 

TWO PART EPOXIES

Online Shop | LOCTITE (Henkel) | TWO PART EPOXIES

Teroson MS9399 x 50ml White colour

Teroson MS9399 x 50ml White colour

Price: (5 or fewer items) ú11.00 (Excluding VAT 798 545 068 at 20%) Price: (6 = Full box) ú9.53 (Excluding VAT 798 545 068 at 20%)

Quantity:

Teroson MS 9399 is a highly viscous, sag-resistant, two-component adhesive based on silane-modified polymers, which cures independently of the atmospheric moisture to an elastic product. It is free from solvents, iscoyanates and silicones. Teroson MS 9399 has good UV and weathering resistance and can be employed for
bondings in indoor and outdoor uses.



People who bought this item also bought:
1. PQ50 x 50ml Heavy Duty Plastic Dispensing Gun
2. MN125 Small White Round Mixer Nozzles (PACK OF 25)

9455 Loctite Hysol Two Part Toughened Epoxy 50ml

9455 Loctite Hysol Two Part Toughened Epoxy 50ml

Price: ú11.64 (Excluding VAT 798 545 068 at 20%)

Quantity:

Hysol® 9455™ is a fast-curing, toughened, low viscosity, industrial grade epoxy adhesive. Ideal for bonding and potting of optical components like sensors and lenses.
PQ50 GUN REQUIRED


DATASHEET

9466 Loctite Hysol Two Part Toughened Epoxy 50ml (4-5 Days Lead Time)

9466 Loctite Hysol Two Part Toughened Epoxy 50ml (4-5 Days Lead Time)

Price: ú10.83 (Excluding VAT 798 545 068 at 20%)

Quantity:

Hysol® 9466™ is a toughened, 2:1 ratio, industrial grade epoxy adhesive with extended work life. Once mixed, the two component epoxy cures at room temperature to form a tough, off-white bondline which provides high peel resistance and high shear strengths. The fully cured epoxy is resistant to a wide range of chemicals
and solvents, and acts as an excellent electrical insulator.
Hysol® 9466™ provides excellent bond strengths to a wide
variety of plastics and metals. Typical applications
include general purpose industrial applications requiring
extended work life for adjusting parts during assembly.
PQ50 GUN REQUIRED


DATASHEET

9483  Loctite«  Hysol«  Two Part General Purpose Epoxy Adhesive 50ml (4-5 Days Lead Time)

9483 Loctite® Hysol® Two Part General Purpose Epoxy Adhesive 50ml (4-5 Days Lead Time)

Price: ú10.58 (Excluding VAT 798 545 068 at 20%)

Quantity:

9483 Loctite® Hysol® Two Part General Purpose Epoxy Adhesive

Loctite® Hysol® 9483 is a two part, 2:1, flexible, general purpose, epoxy adhesive resin which cures ultra clear. It is a low viscosity, flowable adhesive which cures at room temperature. 9483 gives 30 minutes working time before cure, so it is ideal for bonding metal, glass and electronic assemblies which require some final positioning adjustment before curing. 9483 is ultra clear, flowable and has a low moisture absorption. It is ideal for bonding and potting where optical clarity and high strength are required. It is also ideal for bonding decorative panels and displays. Colour : Crystal Clear. 9483 will sustain service temperatures up to 100 degrees.
PQ50 GUN REQUIRED


DATA SHEET

E01 x 50mls Loctite«  Two Part Epoxy Adhesive

E01 x 50mls Loctite® Two Part Epoxy Adhesive

Price: ú15.81 (Excluding VAT 798 545 068 at 20%)

Quantity:

E01 Loctite® Two Part Epoxy Adhesive 50ml

E01 epoxy resin is a general purpose, fast setting, two part, 1:1 epoxy adhesive. E01 will bond to a wide variety of materials including wood, metal, plastic and ceramic. E01 cures rapidly and it will give good handling strength within 5 minutes. It is also available packed into a handy 'EDS' cartridge which provides metered and accurately mixed adhesive directly onto the components to be glued. These good E01 features provide an adhesive which is suitable for the rapid assembly of small components, or for fast and effective repair work. Colour is : Clear. E01 was also known as "Double Bead". Colour : Clear. E01 can withstand temperatures from -55° to +100° C. E01 is supplied in cartridges which require a glue dispensing gun. E01 cartridges must be kept at 20° to 25°C to avoid crystals forming when the resin gets cold. Crystals will be removed and normal consistency resumed by warming at 40°C for 20 minutes. E01 is also known as "Double Bead".
Loctite® E01 was previously known as "Bondmaster E01".
For spare nozzles order MN125 50ml nozzles
FOR BULK ORDERS, PLEASE CONTACT US FOR SPECIAL PRICES.
PQ50 GUN REQUIRED


DATA SHEET

E04 x 50mls Loctite«  Two Part Epoxy Adhesive

E04 x 50mls Loctite® Two Part Epoxy Adhesive

Price: ú13.70 (Excluding VAT 798 545 068 at 20%)

Quantity:

E04 Loctite® Two Part Epoxy Adhesive 50ml

E04 is a two part, 1:1 epoxy resin adhesive. It is a very tough material used in structurally demanding applications which require excellent resistance in service to vibration and impact loading, combined with the benefit of a cure within 3 hours and a quick 30 minutes curing time when heated at 60°C. E04 is capable of bonding a wide variety of materials, such as wood, metals, plastics and ceramics. E04 is particularly suited to the assembly of composite structures made from SMC, DMC or 'wet lay-up' polyesters. E04 has over 20 years of proven performance in industry. Colour : Grey. E04 can withstand temperatures from -55° to +70°C. E04 is supplied in 5 litres tins for both Part A and Part B (both are required) and in cartridges which require a glue dispensing gun. E04 in cartridges must be kept at 20° to 25°C to avoid crystals forming when the resin gets cold. Crystals will be removed and normal consistency resumed by warming at 40°C for 20 minutes.
Loctite® E04 was previously known as "Bondmaster E04".
For spare nozzles please order MN125 50ml nozzles
FOR BULK ORDERS,PLEASE CONTACT US FOR SPECIAL PRICES.
PQ50 GUN REQUIRED


DATA SHEET

E32 x 50mls Loctite«  Two Part Epoxy

E32 x 50mls Loctite® Two Part Epoxy

Price: (9 or fewer items) ú16.25 (Excluding VAT 798 545 068 at 20%) Price: (10 = Full box) ú14.87 (Excluding VAT 798 545 068 at 20%)

Quantity:

E32 Loctite® Two Part Epoxy Adhesive 50ml

E32 is a two part epoxy resin adhesive which has remarkable resistance to both static and dynamic loading. It bonds to a wide variety of materials including metals, composites, ceramics and wood. E32 has been selected for many industrial assemblies where structural integrity is required. Applications extending back over 20 years confirm its excellent environmental durability. E32 can be accurately mixed and applied directly onto the assembly surfaces by using E32 in the 'EDS' cartridge pack. Colour : Grey. E32 can withstand temperatures from -55° to +80°C. E32 is supplied in 5 litres tins for both Part A and Part B (both are required) and in cartridges which require a glue dispensing gun. E32 in cartridges must be kept at 20° to 25°C to avoid crystals forming when the resin gets cold. Crystals will be removed and normal consistency resumed by warming at 40°C for 20 minutes.
Loctite® E32 was previously known as "Bondmaster E32".
FOR BULK ORDERS, PLEASE CONTACT US FOR SPECIAL PRICES.
PQ50 GUN REQUIRED


DATA SHEET

E32 X 400mls  Loctite«  Two Part Epoxy

E32 X 400mls Loctite® Two Part Epoxy

Price: ú52.71 (Excluding VAT 798 545 068 at 20%)

Quantity:

E32 Loctite® Two Part Epoxy Adhesive 400ml

E32 is a two part epoxy resin adhesive which has remarkable resistance to both static and dynamic loading. It bonds to a wide variety of materials including metals, composites, ceramics and wood. E32 has been selected for many industrial assemblies where structural integrity is required. Applications extending back over 20 years confirm its excellent environmental durability. E32 can be accurately mixed and applied directly onto the assembly surfaces by using E32 in the 'EDS' cartridge pack. Colour : Grey. E32 can withstand temperatures from -55° to +80°C. E32 is also supplied in 5 litres tins for both Part A and Part B (both are required) and in cartridges - 400ml, 50ml and 200ml which require glue dispensing guns. E32 in cartridges must be kept at 20° to 25°C to avoid crystals forming when the resin gets cold. Crystals will be removed and normal consistency resumed by warming at 40°C for 20 minutes.
Loctite® E32 was previously known as "Bondmaster E32".
PQ401 GUN REQUIRED


DATA SHEET

E32A x 5Ltrs Loctite«  Two Part Epoxy

E32A x 5Ltrs Loctite® Two Part Epoxy

Price: ú162.51 (Excluding VAT 798 545 068 at 20%)

Quantity:

E32 Loctite® Two Part Epoxy Adhesive - Part A - 5 Litres

E32 is a two part, manually mixed 1:1, toughened epoxy resin adhesive. Part A is supplied in 5 litre pales. It must be used with E32 Part B - See "E32 Part B" in this Menu. E32 has remarkable resistance to both static and dynamic loading. It bonds to a wide variety of materials including metals, composites, ceramics and wood. E32 has been selected for many industrial assemblies where structural integrity is required. Applications extending back over 20 years confirm its excellent environmental durability. Colour : White (and Grey when mixed with Part B). E32 can withstand temperatures from -55° to +80°C. However, it can withstand temperature of up to 200°C for short periods. E32 is supplied in 5 Litres tins for both Part A and Part B (both are required) E32 must be kept at 20° to 25°C to avoid crystals forming when the resin gets cold. Crystals will be removed and normal consistency resumed by warming at 40°C for 20 minutes.
Loctite® E32 was previously known as "Bondmaster E32".
FOR BULK ORDERS, PLEASE CONTACT US FOR SPECIAL PRICES.


DATA SHEET

E32B x 5Ltrs  Loctite«  Two Part Epoxy

E32B x 5Ltrs Loctite® Two Part Epoxy

Price: ú162.51 (Excluding VAT 798 545 068 at 20%)

Quantity:

E32 Loctite® Two Part Epoxy Adhesive - Part B - 5 Litres

E32 is a two part, manually mixed 1:1, toughened epoxy resin adhesive. Part B is supplied in 5 litre pales. It must be used with E32 Part A - See "E32 Part A" in this Menu. E32 has remarkable resistance to both static and dynamic loading. It bonds to a wide variety of materials including metals, composites, ceramics and wood. E32 has been selected for many industrial assemblies where structural integrity is required. Applications extending back over 20 years confirm its excellent environmental durability. Colour : Black (and Grey when mixed with Part A). E32 can withstand temperatures from -55° to +80°C. However, it can withstand temperature of up to 200°C for short periods. E32 is supplied in 5 Litres tins for both Part A and Part B (both are required) E32 must be kept at 20° to 25°C to avoid crystals forming when the resin gets cold. Crystals will be removed and normal consistency resumed by warming at 40°C for 20 minutes.
Loctite® E32 was previously known as "Bondmaster E32".
FOR BULK ORDERS, PLEASE CONTACT US FOR SPECIAL PRICES.


DATA SHEET

E3520  Loctite«  Two Part Epoxy Adhesive Part A x 1kg

E3520 Loctite® Two Part Epoxy Adhesive Part A x 1kg

Price: ú59.74 (Excluding VAT 798 545 068 at 20%)

Quantity:

E3520 Part A x 1kg Loctite® Two Part Epoxy Adhesive

E3520 is a medium viscosity two part epoxy adhesive with improved resistance to elevated temperatures. It also has good chemical resistance. E3520 is particularly suitable for metal bonding of components where high service temperatures will be endured. It can provide a high strength and durable bond on a variety of materials including metals, plastics, glass, ceramics and ferites. E3520 is supplied as Part A and Part B each in 1 Kg tins only. It has a mix ratio of 2:1 by weight. Colour, mixed : Grey.
Loctite® E3520 was previously known as "Bondmaster E3520".
FOR BULK ORDERS, PLEASE CONTACT US FOR SPECIAL PRICES.


DATA SHEET

People who bought this item also bought:
1. E3520 Loctite® Two Part Epoxy Adhesive Part B x 1Kg

E3520  Loctite«  Two Part Epoxy Adhesive Part B x 1Kg

E3520 Loctite® Two Part Epoxy Adhesive Part B x 1Kg

Price: ú59.74 (Excluding VAT 798 545 068 at 20%)

Quantity:

E3520 Loctite® Two Part Epoxy Adhesive - Part B - 1Kg

E3520 is a medium viscosity two part epoxy adhesive with improved resistance to elevated temperatures. It also has good chemical resistance. E3520 is particularly suitable for metal bonding of components where high service temperatures will be endured. It can provide a high strength and durable bond on a variety of materials including metals, plastics, glass, ceramics and ferites. E3520 is supplied as Part B and Part A, each in 1 Kg tins only. It has a mix ratio of 2:1 by weight. Colour, mixed : Grey.
Loctite® E3520 was previously known as "Bondmaster E3520".
FOR BULK ORDERS, PLEASE CONTACT US FOR SPECIAL PRICES.


DATA SHEET

People who bought this item also bought:
1. E3520 Loctite® Two Part Epoxy Adhesive Part A x 1kg

F246  Loctite«  Structural Acrylic Adhesive 50ml KIT

F246 Loctite® Structural Acrylic Adhesive 50ml KIT

Price: ú21.13 (Excluding VAT 798 545 068 at 20%)

Quantity:

F246 Loctite® Toughened Acrylic Adhesive

F246 is a 2 part "no-mix" structural acrylic adhesive which cures rapidly at room temperature. Its exceptional resistance to peel, fatigue and impact loads on a wide variety of surfaces, combined with excellent environmental durability and chemical resistance, make it ideal for applications demanding structural integrity. The "no mix" feature allows the resin to be applied to one surface and the initiator applied to the second surface. Once the components are brought together, the handling strength is achieved in approximately 1 minute. The F246's outstanding performance allows the adhesive to be used in place of rivets and/or welding, thereby providing reduced assembly times, lighter structures and an improved aesthetic appearance. F246 is recommended by Lotus Cars.
The F246 50ml kit comes with a bottle of Initiator No. 5.
Loctite® F246 was previously known as "Bondmaster F246".
FOR BULK ORDERS, PLEASE CONTACT US FOR SPECIAL PRICES.

F246 APPLICATIONS : Aerospace, Electronics, Automotive, Composite & SMC Bonding, Sheet Metal, Magnet and Ferrite bonding.


DATA SHEET

INITIATOR  No 1 Loctite« Surface Initiator 35ml

INITIATOR No 1 Loctite® Surface Initiator 35ml

Price: ú11.59 (Excluding VAT 798 545 068 at 20%)

Quantity:

INITIATOR No. 1 Loctite® Surface Initiator 35ml

Loctite® Initiator No. 1 is a surface initiator used to prepare the surface to be bonded for Loctite® Toughened Acrylic Adhesives. Initiator No. 1 allows approximately 5 minutes of handling time before the adhesive cures and the sets hard. Initiator No. 1 is normally used with F241 Toughened Acrylic Adhesive and it is supplied with the smaller packs of F241.
Loctite® INITIATOR No. 1 was previously known as " INITIATOR No. 1".


DATA SHEET

FE-RAPID  Loctite« -  Two Part Epoxy Adhesive  400g

FE-RAPID Loctite® - Two Part Epoxy Adhesive 400g

Price: ú35.14 (Excluding VAT 798 545 068 at 20%)

Quantity:

FE-RAPID Loctite® - Two Part Epoxy Adhesive E3726 - 400gm

FE-RAPID is a two part epoxy metal filled adhesive. It is a heavy paste resin designed for use in industry for fast repairs to damaged metalwork, such as castings, pipes, valves and engines. Once working strength has been achieved, FE-RAPID can be machined, drilled, tapped or sawn in the same way as solid metal. This adhesive is suitable for both bonding and applying over the surfaces of all common metals to provide an almost invisible repair on the darker metallic surfaces like iron and steel. The product has excellent resistance to abrasion, chemicals and corrosion. Colour : Grey. It can withand temperatures from -55 to +100°C. For short periods, it can endure 200°C. This product is also known as : E3726.
Loctite® - Bondmaster FE-RAPID was previously known as "Bondmaster FE-RAPID".


DATA SHEET

Online Shop | LOCTITE (Henkel) | TWO PART EPOXIES

Copyright ę 2011 Glueonline.co.uk - Adhesive Solutions for Industry Terms and Conditions Click Here